Leckey Mygo Mode D'emploi page 14

7.8 Attaching the Knee
Straps
First of all you will need to feed the webbing
through the plastic D ring as shown in (a).
To attach the knee straps insert the plastic
clip (b) into the buckle (c) on the side of the
main knee support. Then grab the straps
ends (d) and pull firmly away from the user,
which will secure the strap around the user's
leg. To remove the strap, simply squeeze the
tabs on the top and bottom of the plastic clip
(b) and the strap will pop off.
A
D
C
B