Caractéristiques Techniques - EXFO FTB-1 Guide D'utilisation

Caractéristiques techniques
PM-1 BUILT-IN POWER METER SPECIFICATIONS
Calibrated wavelengths (nm)
Optional CWDM calibrated
wavelengths (nm)
Power range (dBm)
e
Uncertainty (%)
Display resolution (dB)
InGaAs
GeX
Automatic offset nulling range
Tone detection (Hz)
VISUAL FAULT LOCATOR (VFL)
Laser, 650 nm ± 10 nm
CW
Typical P in 62.5/125 μm: 3 dBm (2 mW)
out
a. With optional extended-life battery.
b. –20 °C to 60 °C (–4 °F to 140 °F) with the battery pack, and for the AC adapter.
c. The selected model may change without notice.
d. At 23 ºC ±1 ºC, 1550 nm and FC connector. With modules in idle mode. Battery operated.
e. Up to 5 dBm.
f. For ±0.05 dB, from 18 ºC to 28 ºC.
222
d
850, 1300, 1310, 1490, 1550, 1625, 1650
1270, 1290, 1310, 1330, 1350, 1370, 1390, 1410, 1430, 1450, 1470, 1490,
1510, 1530, 1550, 1570, 1590, 1610, 1383, 1625
10 to —86 (InGaAs)
26 to —64 (GeX)
±5 % ± 3 pW (InGaAs)
±5 % ± 0.4 nW (GeX)
0.01 = max to —76 dBm
0.1 = —76 dBm to —86 dBm
1 = —86 dBm to min
0.01 = max to —54 dBm
0.1 = —50 dBm to —60 dBm
1 = —60 dBm to min
f
Max power to —63 dBm for InGaAs
Max power to —40 dBm for GeX
270/1000/2000
(OPTIONAL)
LASER SAFETY
FTB-1