A Caractéristiques Techniques - EXFO FPM-300 Guide D'utilisation

Table des Matières

Publicité

A Caractéristiques
techniques
Les caractéristiques techniques suivantes peuvent être modifiées
sans préavis. Les informations présentées dans cette section sont
fournies uniquement à titre de référence. Pour obtenir les plus
récentes spécifications techniques de ce produit, visiter le site Web
de EXFO Inc. à l'adresse suivante : www.exfo.com.
Model
2
Power meter port
Power range
3
(dBm)
Range displayed (dBm)
Number of calibrated wavelengths
Power uncertainty
5
Resolution (dB)
Automatic offset nulling
8
Warmup time
9
(s)
Display units
Automatic wavelength recognition
Screen refresh rate (Hz)
Tone detection (Hz)
Battery life (hours) (typical)
Warranty and recommended
calibration interval (years)
General Specifications
Size (H x W x D)
Weight
Temperature operating
storage
Relative humidity
Model
2
Central wavelength (nm)
Spectral width
3
(nm)
Output power (dBm)
Power stability
4
(dB)
8 hours
Battery life
5
(hours)
Enables automatic wavelength recognition
Tone generation (Hz)
Warranty and recommended calibration interval (years) 3
General Specifications
Size (H x W x D)
Weight
Temperature operating
storage
Relative humidity
Notes
1. Guaranteed unless otherwise specified.
2. All specifications valid at 23 °C ± 1 °C, with an FC connector.
3. rms for lasers and -3 dB width for LEDs; typical values for LEDs.
4. After 15 minutes warmup; expressed as ± half the difference between
the maximum and minimum values measured during the period, with an APC connector on the power meter.
5. Typical autonomy in Auto mode.
FPM-300/FLS-300/FOT-300
FPM-302
Ge
10 to -60
Down to -65
4
10
± 5 % ± 1 nW
0.01
6
Yes
0
dB/dBm/W
10
Yes
3
270, 1 k, 2 k
> 300
3
18.5 cm x 10.0 cm x 5.5 cm
0.4 kg
-10 °C to 50 °C
-40 °C to 70 °C
0 % to 95 % non-condensing
23BL
1310 ± 20
1550 ± 20
≤ 5
≥ 1/≥ 1
± 0.10
120
Yes
270, 1 k, 2 k
18.5 cm x 10.0 cm x 5.5 cm
0.4 kg
-10 °C to 50 °C
-40 °C to 70 °C
0 % to 95 % non-condensing
I
MPORTANT
FPM-302X
GeX
26 to -50
Down to -50
10
± 5 % ± 10 nW
0.01
7
Yes
0
dB/dBm/W
Yes
3
270, 1 k, 2 k
> 300
3
(7
/
in x 4 in x 2
/
in)
1
1
4
8
(0.9 lb)
(14 °F to 122 °F)
(-40 °F to 158 °F)
234BL
235BL
1310 ± 20
1310 ± 20
1550 ± 20
1490 ± 10
1625 ± 15
1550 ± 20
≤ 5
≤ 5
≥ 1/≥ -3/≥ -5
≥ 1/≥ -4.5/≥ -3
± 0.10
± 0.10
100
120
Yes
Yes
270, 1 k, 2 k
270, 1 k, 2 k
3
3
(7
/
in x 4 in x 2
/
in)
1
1
4
8
(0.9 lb)
(14 °F to 122 °F)
(-40 °F to 158 °F)
Standard Accessories
User guide, Certificate of Calibration, instrument
stickers in six languages, connector adapter (FOA-XX),
AC adapter, three AA batteries, wrist strap, alcohol
cleaning pads.
Notes
1. Guaranteed unless otherwise specified.
2. All specifications valid at 1550 nm
and 23 °C ± 1 °C, with an FC connector.
3. In CW mode; sensitivity defined as 6 x rms
noise level.
4. Wavelengths: 830 nm, 850 nm, 980 nm,
1300 nm, 1310 nm, 1450 nm, 1490 nm,
1550 nm, 1590 nm and 1625 nm.
5. Traceable to NIST; FPM-302X: up to 20 dBm.
6. From 10 dBm to -50 dBm.
7. From 26 dBm to -35 dBm.
8. Power of > -40 dBm for FPM-302, and
of > -25 dBm for FPM-302X.
9. For ± 0.05 dB and temperatures of > 18 °C.
10. At 850 nm, 1300 nm, 1310 nm, 1490 nm, 1550 nm
and 1625 nm; power of > -50 dBm for FPM-302,
and of > -40 dBm (typical) for FPM-302X.
12D
850 ± 25
1300 +50/-10
50/135
≥ -18/≥ -18 (62.5/125 μm)
± 0.10
120
Yes
270, 1 k, 2 k
3
Standard Accessories
User guide, Certificate of Calibration, instrument
stickers in six languages, AC adapter, three AA
batteries, wrist strap, alcohol cleaning pads.
Safety
21 CFR 1040.10 and IEC 60825-
1:1993+A1:1997+A2:2001:
CLASS 1M LASER PRODUCT
01-VCL
850 ± 20
≤ 1
≥ -3 (50/125 μm)
± 0.25
250
Yes
270, 1 k, 2 k
3
36

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fls-300Fot-300

Table des Matières