Beurer MP 42 Mode D'emploi page 4

4. To Use
1. Select an attachment and gently push it onto the spindle. To remove, pull the
attachment straight out.
2. Switch the device on by sliding the power switch back for a counterclockwise
rotation (the Power LED will illuminate in red) or forward for clockwise rotation
(the Power LED will illuminate in green).
3. All file and cutting attachments are coated with a sapphire grain. This ensures
long life. Do not exert heavy pressure and always guide the attachments care-
fully in circular movements slowly over the parts to be treated.
4. Press the Speed Buttons (+ and –) to select a rotation speed. Start every treat-
ment at low speed and increase only as required.
5. Always ensure that the spindle can rotate freely. It must never be permanently
jammed; otherwise, the instrument will become too hot and suffer damage.
6. Blue Speed Indicator LEDs will illuminate to indicate the selected speed from
one to five.
7. Check the results during treatment. This is particulary important for diabetics,
since their hands and feet are less sensitive.
8. After every use, apply moisturizing cream to the parts treated.
5. Attachments
Since the attachments are of a high quality and improper use can lead to injury,
handle the attachments carefully. Use extra caution when operating the device
at high speeds.
The following attachments are provided with your appliance:
1 – Flame milling cutter
Removes ingrown nails. Carefully guide the flame
cutter over to the treatment area in order to remove
parts of the nail as necessary.
2 – Cylindrical milling cutter
Grinds and smooths lignified foot nail surfaces. Ap-
ply the milling cutter horizontally to the nail surface
and remo ve the unwanted layer of nail using slow
circular movements.
6
3 – Felt cone
Smooths and polishes the edge of the nail after
filing and cleans the nail surface. Always polish in
circular movements and do not allow the felt cone
to rest in one place.
4 – Sapphire cone
Removes dry skin or calluses from the soles of the
feet and heels; also manicures nails.
5 – Sapphire callus rasp
Rapidly removes stubborn calluses and hard skin on
the soles of feet and heels.
6 – Coarse Sapphire Disc
Files and treats nails. Shortens thick nails. Quickly
removes large areas of the nail, so proceed with
caution when using this attachment.
7 – Fine Sapphire Disc
Files and treats nails. Only the inner disk rotates,
while the outer cover remains stationary; this
enables precise filing while minimizing the risk of
skin burns.
8 – Dust Shield
Keeps dust and debris away from hands and face. Clip
into place after inserting desired attachment..
CAUTION
Always work from the outside of the nail towards the tip. Always check
results regularly during treatment. If treatment becomes unpleasant,
stop immediately.
7