Water Reservoir; Water Filter; Side View; Front View - Ge Profile Xpiox4Swbb Manuel Du Propriétaire

Making Ice with Opal
Once Opal has been cleaned/sanitized, move the ice maker to its desired location and complete the following steps.
1. R emove ice bin.
2. F ill reservoir with potable (safe to drink) water up to
the "Max Fill" line. Water hardness must be less than
12 grains per gallon. Do not fill reservoir with any liquid
except water. Using any liquid except potable water is
misuse and will void your warranty.
3. Plug the ice maker into a grounded outlet.
4. Touch the Power button to start the ice maker. The
indicator on the left-hand side will light up 'Making Ice' to
confirm that unit has begun to make ice.
5. O pal will begin to produce ice in 10 minutes or less. It
will continue to make ice until the bin is full, or it runs out
of water. To continue making ice, just add more water.

Water Filter

Your Opal is only compatible with Opal brand filters
available at geappliances.com. Please follow the
installation instructions included with your filter.
Water filter snaps into place
10
Side View
Max fill line
Water Reservoir
NOTE: Remove your water filter (if installed) and reinstall
the screened intake cap prior to cleaning your Opal.
Water Filter
Front View
49-9000063 Rev. 1