Winkhaus panicLock 179 Instructions D'installation, D'utilisation Et D'entretien page 27

Installation, Operating and Maintenance
Instructions panicLock 179
• Study the installation and maintenance instructions in this operating manual and
keep them in a place where they can be accessed without any problems. Pass them
on to the end customer after having installed the entrance door.
• The manufacturer shall not be held liable for damage caused by use contrary to the
intended purpose of the product.
• For security reasons, the locking units are designed to be used in conjunction with
the genuine Winkhaus parts. If you use other parts, the given properties of the lo-
cking system can be adversely effected.
• Arbitrary modifications, changes or makeshift repairs are not permitted for safety
reasons! You must only use genuine Winkhaus parts for replacements.
• Winkhaus does not accept liability for any type of damage caused by inadequate
repair, modification or maintenance works made.
1.6 Abbreviations/Explanations
The following terms and abbreviations are used in these operating manual:
STV
AP
BM
Handle
panicLock M 179
panicLock AV3 OR 179 Emergency Exit Locking System STV-AP 179 AV3 OR
panicLock BM EN 179 Emergency Exit Locking System STV-BM EN 179
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen
Subject to technical changes
Security Door Lock
Emergency (antipanic)
blueMotion
Door Handle/Pushing Handle
Emergency Exit Locking System STV-AP 179
(manual three-point locking system)
(automatic multi-point locking system without deadbolt)
(motor-driven multi-point locking system blueMotion)
5 Print-no. 504 474 2
09/2016
Important
Information
Product
Description
Installation
Maintenance
and Care
Appendix
www.winkhaus.de
EN
1
2
3
4
5