Dab+ Operation; Manual Tuning - LENCO MC-148 DAB+ Mode D'emploi

DAB+ OPERATION

Switch to DAB+ mode by pressing SOURCE button on the unit or
DAB/FM button on the remote control.
AUTO SCAN MODE
1.To activate the full scan, press the STOP/MENU button.
2. When you see the <Autoscan> option, press the PLAY/ PAUSE or
ENTER button. The unit will search for all available DAB+ stations
that can be tuned.

MANUAL TUNING

As well as an auto tune function, you can manually tune the receiver.
1. Press the STOP/MENU button in DAB+ mode, and use either
on the unit,
PLAY/PAUSE button on the main unit or ENTER button on the
remote to activate the manual tune options.
2. Now use the
the DAB+ ensembles/multiplexes, which are numbered from 5A to
13F.
3. Press the ENTER or PLAY/PAUSE button to view the ensemble/
multiplex details. Press the ENTER or PLAY/PAUSE button again
to enter the multiplex.
4. To see what stations are present in the found ensemble/multiplex,
just press either
located a station that you would like to listen to, press the ENTER
or PLAY/PAUSE button.
5. Any stations found during the manual tune operation will be added
to your station list.
STORING STATION PRESETS
It is possible to store up to 10 of your favorite stations. This will enable
you to access your favorite stations quickly and easily.
1. To store a preset, you must first be listening to the station that you
would like to save.
2. Then press and hold one of the numeric buttons from 1-0 to store
the station under that number. You will see Preset X Stored appear
on the display with X being the number you stored the station under.
on the remote to find <Manual tune>. Press the
/
on the unit,
/
on the unit,
/
on the remote to cycle through
/
on the remote. When you've
/
8
/