Program Playback - LENCO MC-148 DAB+ Mode D'emploi

CD OPERATION

PROGRAM PLAYBACK

You may wish to play back tracks of a CD in a different order than the
original disc was recorded in.
1. Press the PROGRAM button to enter the program setup function.
2. Use the
3. Set the play order track numbers using the numeric keys.
For example: the diagram on the right would play track 02 as the first
track and track 14 as the second track.
4. When tracks 1-2 are set, use the
order screens. Repeat steps 2-3 for the remainder of the program
play list.
5. When complete, use the
on the right of the display and press the ENTER or PLAY/PAUSE
button to begin playback.
6. To cancel the program sequence, press the STOP/MUNE button
twice.(The first press is to stop the playback, and the second is to
cancel.)
NOTE: The program function is not enable with Mp3 Cds.
RANDOM CD OPERATION
1. Press the SHUFFLE button on the remote control. The CD contents
will be played once in a random order. You will see 'SHUFFLE' on
the display.
2. To cancel the random operation, press the SHUFFLE button again.
You will see 'OFF' on the display.
NOTE: The SHUFFLE play is only available on standard music Cds,
not Mp3 Cds.
buttons to skip between the play order numbers.
PROGRAM INPUT
Play Order 01[00]
Track Number
PROGRAM INPUT
01[02]
02[00]
02[14]
buttons to access further play
/
/ buttons to scroll across to the arrow
7