Audio Mode - LENCO MC-148 DAB+ Mode D'emploi

FM OPERATION
RECALLING A STATION PRESET
To select a preset, just press the required numeric button while in FM
mode to activate the station you stored.
DISPLAY MODES
Every time you press the INFO button repeatedly on the remote control,
the display will cycle through the following display modes: The
information is displayed on the lower segment of the LCD display.

Audio Mode

This denotes whether the stations is in stereo or mono.
Radio Text
As with DAB+, the broadcaster can include a scrolling text that displays
information about the current program. If Radio text information is not
available, then the display will show <No Radio Text>.
PTY (Program type)
This describes the "Style" or "Genre" of music that is being broadcast
e .g ."Rock "or "Classical". if no program type has been set, then <No
PTY> will be displayed.
Name(Program name)
This will display the frequency of the current station. If no program
name, <No Name> will be displayed.
AUDIO MODE
Press STOP/MENU button repeatedly on the remote control, the
display will cycle through the display modes. When shows <Audio
setting>, press ENTER button to select between <Stereo allowed>
and <Forced mono>.
Audio Mode(Stereo/Mono)
Radio Text
PTY
Name
13