Bluetooth Audio; Sleep Function; Energy Saving - LENCO MC-150 Mode D'emploi

BLUETOOTH AUDIO

Please follow the pairing instructions below to link the unit to your Bluetooth device.
1. Press the SOURCE button repeatedly to enter the Bluetooth mode. The display will show "BT". It will start searching and will
display a flashing "PAIRING".
2. If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the display and the
Bluetooth status indicator will keep on flashing. Turn on the Bluetooth function of your device and enable the search until "Lenco
MC-150" is found. Select "Lenco MC-150" on the Bluetooth device to make connection. Enter the pass code "0000" if required.
3. After successfully paired the unit will display "BT AUDIO".
4. You can now start playing music from your smartphone wirelessly to the speaker.
5. You can press the BT PLAY/PAUSE
6. You can press the BT PREVIOUS
"This product has a bluetooth reception function, you can not transmit any bluetooth sound with it: this means that you can receive
wirelessly a bluetooth sound signal from an external source like a smartphone."
AUX IN
This allows you to connect an external player's sound through your unit.
1. Plug a 3.5mm audio cable (not included) into your external player's line out and the other end into the AUX IN jack.
2. Press the SOURCE button to enter AUX mode. Display shows "AUDIO IN"
3. Start your external player to play music.
4. The unit will output the sound.
If it is in AUX mode more than 4 hours, it will automatically switch to standby mode. When it is 10 minutes before entering the
standby, the display will flash. You can press PLAY button to disable the auto-off function.
EQ OPERATION
You can enjoy different EQ sound effect modes. Press the EQUALIZER button will change to different sound effects of
FLAT/CLASSIC/ROCK/POP/JAZZ.
X-BASS
You can also boost the bass effect of the music. Press the X-BASS button will toggle the X-Bass effect between ON and OFF.

SLEEP FUNCTION

1. When the unit is switched on, press the SLEEP button repeatedly to select a sleep duration from either SLEEP 00 (sleep off), 90,
80, 70, 60, 50, 40, 30, 20 or 10 minutes. The sleep icon
2. When the sleep timer is zero, the unit will turn off automatically.
3. To cancel the sleep function, press the STANDBY button to turn off the unit. Or press the SLEEP button repeatedly to select
"SLEEP 00".

ENERGY SAVING

Due to ErP stage 2 requirement and protect the environment, the unit will turn off to the standby mode automatically once no music
has been playing for about 15 minutes except in AUX mode. If it is in AUX mode more than 4 hours, it will automatically switch to
standby mode. When it is 10 minutes before entering the standby, the display will flash. You can press PLAY button to disable the
auto-off function.
To reactivate the unit, press the STANDBY button to turn on the unit.
SOFTWARE VERSION CHECK
You can check the unit software version.
1. Turn on the unit in DAB mode or FM mode.
2. Press the remote control MENU button (or press and hold the MENU/INFO button on the front panel) to access the menu
control.
3. Press the PREVIOUS
4. Press the PREVIOUS
version number.
5. Press the remote control MENU button to exit the menu control.
button to pause or resume the playback.
or BT NEXT
or NEXT button until "SYSTEM" is displayed and then press the ENTER button.
or NEXT button until "SW VER" is displayed and then press the ENTER button to show the software
button to search to the previous or next song.
will be shown on the display.
13