Ryobi RVI4-0 Mode D'emploi page 4

Do not use the product to spray
further use of the inflator or air
tool, a guard or other part that
is damaged should be carefully
checked to determine that it will
operate properly
for alignment of moving parts,
binding of moving parts, breakage
of parts, mounting,
other conditions that may affect
part that is damaged should be
properly repaired
Following this rule will reduce the
them frequently and use them to
instruct others who may use this
inflator, loan them these instructions
Ambient temperature range for tool
Ambient temperature range for
The recommended
temperature range for the charging
system during charging is between
Exhausted batteries are to be
removed from the product and
4
and perform
ADDITIONAL BATTERY SAFETY
WARNINGS
and any
or replaced
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance
with local and national provisions and
Follow
on packaging and labelling when
ambient
Ensure that no batteries can come
in contact with other batteries or
conductive materials while in transport
by protecting exposed connectors
with insulating, non-conductive caps
If the product is to be stored unused
for a long period, the batteries
61558-2-16
WARNING:
To reduce the risk of fire, personal
a short circuit, never immerse the
tool, battery pack, or charger in fluid
such as seawater, certain industrial
chemicals, and bleach or bleach-
Ambient temperature
Ambient temperature
all special
60335-1
range for
range for
requirements