Software Update - Clage Dsx Touch Instructions D'utilisation Et D'installation

4. CLAGE app "Smart Control"

Software update

Updating the Smart Control app
We recommend using the latest software in order to ensure the impeccable and secure
operation of the DSX Touch.
Any new control app version will be indicated in the app store.
• Updating iOS-devices: For updating your control app, select the "Updates" tab in
the appstore and tap on the "Update" button which is to the right of the control
app.
• Updating Android-OS-devices: For updating your control app, select the Smart
Control app in the Google Playstore and tap on the "Update" button.
Updating the DSX Touch firmware
Note: Do not disconnect your DSX Touch from power supply during updates.
• For an update the DSX Touch must be connected to a Wi-Fi network with internet
access.
• The instantaneous water heaters is unavailable during the update for several min-
utes.
1. Go to the device configuration in the settings menu: (menu path: Main menu
Settings → Devices), select the DSX Touch server and tap on "Software"
2. Select "Check for Updates". The DSX Touch compares the installed software version
with the Internet. If a newer version is available, tap the "Install now" button.
If an update is not possible even after multiple attempts, contact the after-sales ser-
vice.
51
CLAGE
EN
→