Work Area; Personal Safety; Personal Protective Equipment - Pro-Point 8570269 Manuel D'utilisation

8570269
WORK AREA
15 pc Angled Air Sanding and
Surface Preparation Kit
1. Operate in a safe work environment. Keep your
work area clean, well lit and free of distractions.
Vl.O
2. Keep anyone not wearing the appropriate safety
equipment away from the work area.
NOTE: Minimize distractions in the work environment.
Distractions can cause you to lose control of the tool.
3. Store tools properly in a safe and dry location. Keep
tools out of the reach of children.
4. Do not use in the presence of flammable gases
or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment
approved
by
the Canadian Standards Association {CSA)
or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1. Always wear impact safety goggles that provide
front and side protection for the eyes. Wear a full-
face shield if your work creates metal filings or
wood chips.
a. Eye protection equipment should comply
with ANSI Z87.1 standards.
2. Wear gloves that provide protection based on the
work materials or to reduce the effects of
tool vibration.
3. Non-skid footwear is recommended to maintain
footing and balance in the work environment.
4. Steel toe footwear or steel toe caps to prevent
injury from falling objects.
4 For technical questions call 1-800-665-8685