PRO-POINT 8570269 Manuel D'utilisation page 12

8570269
15 pc Angled Air Sanding and
Surface Preparation Kit
Vl.O
3. Check for damaged parts. Before using any tool,
any part that appears to be damaged should be
carefully checked to determine that it would
operate properly and perform its intended
functions. Check for alignment and binding of
moving parts, for broken parts or mounting fixtures,
or for any other condition that may affect proper
operation. Any part that is damaged should be
repaired or replaced by a qualified technician.
4. When servicing, use only identical replacement
parts. Only use accessories intended for use with
this tool. Replace damaged parts immediately.
5. Keep the tool clean. Wipe the tool with a clean
cloth and periodically blow out all areas with
compressed air. If compressed air is not available,
use a brush to remove dust from all areas. Do not
use harsh chemicals or solvents to clean the tool.
These chemicals could seriously damage the
plastic housing.
6. Regularly inspect all mounting screws to ensure
tightness. Should any screws become loose,
tighten immediately.
7. If repairs are required, bring your tool to an
authorized service centre.
WARNING! Only qualified service personnel should
repair the tool. An improperly repaired tool may
present a hazard to the user
and/or others.
12
For technical questions call 1-800-665-8685