PRO-POINT 8570269 Manuel D'utilisation page 15

V1.0
DISPOSAL
15 pc Angled Air Sanding and
Surface Preparation Kit
8570269
If your tool has become damaged beyond repair, do not
throw it out. Take it to the appropriate recycling facility.
TROUBLESHOOTING
Contact Princess Auto Ltd. for a solution if the tool does
not function properly or parts are missing. If unable to do
so, have a qualified technician service the tool.
Problem(s)
Possible Suggested
Cause(s) Solution(s)
Tool runs at Motor Have a qualified
normal speed parts worn. technician replace
but loses worn parts.
power
Lack of air 1. Lubricate the
under load.
tool oil.
clutch housing.
2. Check for excess
clutch oil. Overfilling
can cause drag on
high speed
clutch parts.
Grease lubrication
note: Heat usually
indicates insufficient
grease in chamber.
Severe operating
conditions may
require more
frequent lubrication.
Visit www.princessauto.com for more information
15