PRO-POINT 8570269 Manuel D'utilisation page 6

8570269
15 pc Angled Air Sanding and
Surface Preparation Kit
SPECIFIC SAFETY PRECAUTIONS
Vl.O
1. Keep hands and fingers away from sanding area.
Any part of body coming in contact with moving
parts could cause injury.
2. When operating the sander, use proper eye and
hearing protection as well as protective gloves.
3. To maintain complete control, firmly hold your
sander. Do not place hands over air vents. Proper
cooling of the motor is necessary to ensure normal
life of the tool.
4. Never point the sander towards yourself. If it should
slip, part of your body could come in contact with
moving parts.
5. Never force the tool. Excessive pressure could bend
or break the sander, resulting in damage to the tool,
your workpiece or serious personal injury. If your
sander runs smoothly under no load, but does not
run smoothly under load, then excessive pressure is
being used.
6. This tool will not stop moving immediately. Do not
lay the tool down or leave it unattended until it has
come to a complete stop. A part that is moving
could make the tool jump or grab a surface and pull
the tool out of your control.
7. Use an appropriate dust respirator when working
for an extended period of time. This will help
prevent breathing in the fine dust created
while working.
6 For technical questions call 1-800-665-8685