PRO-POINT 8570269 Manuel D'utilisation page 17

Vl.O
Problem(s)
Tool runs
slowly. Air
flows slightly
from exhaust.
Loss of power
or erratic
performance.
15 pc Angled Air Sanding and
Surface Preparation Kit
8570269
Possible Suggested
Cause(s) Solution(s)
Motor parts 1. Check air inlet
jammed with filter
dirt particles. for blockage.
2. Pour air tool oil
into air inlet as
per instructions.
3. Operate tool in
short bursts quickly
reversing rotation
back and forth
where applicable.
Excessive drain Check the air supply.
on the air line. Ensure tool is
Moisture or connected to a
restriction in the 3/8 in . I.D. or larger
air hose. air hose with no
Incorrect size or kinks or restrictions
type of and that the fittings
hose connectors. are
connected properly.
Air compressor Ensure tool is
has connected to a
insufficient flow. compressor whose
rated flow matches
the tool.
Visit www.princessauto.com for more information
17