Important Safety Precautions; Work Area - Pro-Point 8381659 Manuel De L'utilisateur

V 3.01
3/4 in. x 20-1/2 in.
Belt Sander
SPECIFICATIONS
No load speed
Average air consumption
Max. air pressure
Air inlet
Min. Hose Size Required
Air Consumption @ 90 PSI
No Load Speed
Material
Noise Level

IMPORTANT SAFETY PRECAUTIONS

WARNING! Read and understand all instructions before using this tool. The operator must follow
basic precautions to reduce the risk of personal injury and / or damage to the equipment. Before
allowing someone else to use this tool, make sure they are aware of all safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot
cover all possible conditions and situations that may occur. Common sense and caution are
factors that cannot be built into this product, but must be supplied by the operator.
NOTE: Keep this manual for the safety warnings, precautions and operating, inspection and
maintenance instructions. When this manual refers to a part number, it refers to the included
parts list.

WORK AREA

1. Keep your work area clean and well lit. Cluttered and dark areas invite accidents.
2. Operate in a safe work environment. Do not use machines or air tools in damp or wet
locations. Do not expose to rain. Do not use power tools in the presence of flammable gases
or liquids.
3. Keep children, bystanders and visitors away from the work area. Do not let them handle
tools or extension cords. No one should be in the work area if they are not wearing suitable
protective equipment.
4. Store unused equipment. When not in use, tools must be stored in a dry location to prevent
rust. Always lock up tools and keep them out of reach of children.
2
16,000 RPM
4 CFM @ 90 PSI
110 PSI
1/4 in.
3/8 in.
4 CFM
16,000 RPM
Aluminum Housing and Handle
94 decibels
For technical questions call 1-800-665-8685
8381659