Publicité
4
CMD600
Conversions and modifications
The charge amplifier must not be modified from the design or safety
engineering point of view except with our express agreement. Any
modification shall exclude all liability on our part for any damage resulting
therefrom.
In particular, any repair or soldering work on motherboards is prohibited.
When exchanging complete modules, use only original parts from HBM.
The product is delivered from the factory with a fixed hardware and software
configuration. Changes can only be made within the possibilities documented
in the manuals.
General dangers of failing to follow the safety instructions
The CMD600 charge amplifier corresponds to the state of the art and is
failsafe.
The amplifier can give rise to remaining dangers if it is inappropriately
installed and operated by untrained personnel.
Everyone involved with the installation, commissioning, maintenance or repair
of a charge amplifier must have read and understood the Mounting
Instructions and in particular the technical safety instructions.
Residual risks
The scope of supply and performance of the charge amplifier covers only a
small area of measurement technology. In addition, equipment planners,
installers and operators should plan, implement and respond to the safety
engineering considerations of measurement technology in such a way as to
minimize remaining dangers. Prevailing regulations must be complied with at
all times. There must be reference to the remaining dangers connected with
measurement technology. After making settings and carrying out activities that
are password-protected, you must make sure that any controls that may be
connected remain in safe condition until the switching performance of the
amplifier system has been tested.
Working safely
Error messages should only be acknowledged once the cause of the error is
removed and no further danger exists.
HBM
A2815−1.0 en/de/fr
Publicité
