Publicité
Safety, performance, and dependability have been given
top priority in the design of your belt sander.
INTENDED USE
The belt sander is intended to be used only by adults who
have read and understood the instructions and warnings in
this manual, and can be considered responsible for their
actions.
The product i is intended for sanding metal, wood, plastic,
or similar materials. It can also remove paint, varnish, and
corrosion from surfaces. The product should only be used
in well ventilated areas.
The product is designed for dry sanding only. Do not use
for wet sanding.
The belt sander can be used in handheld mode and moved
manually by the operator on the workpiece surface to be
stable platform.
The belt sander can be operated in the inverted mode when
the manufacturer. When in the inverted mode, the operator
guides the work piece to be sanded on the sanding belt.
The product is intended for consumer use only.
Do not use the product for any other purpose. Use of the
product for operations different from intended could result
in a hazardous situation.
WARNING
Dust from certain paints, coatings and materials may
cause irritation or allergic reactions to the respiratory
system. Dust from wood, such as oak, beech, MDF and
others are carcinogenic. Material containing asbestos
specialist operators.
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result in
Save all warnings and instructions for future reference.
GENERAL WORKING STAND SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions
provided with the working stand and the power
tool to be mounted. Failure to follow the warnings
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments or changing accessories.
Accidental starting of the power tool is a cause of some
accidents.
Properly assemble the working stand before
mounting the tool. Proper assembly is important to
prevent risk of collapse.
Securely fasten the power tool to the working stand
before use. Power tool shifting on the working stand
can cause loss of control.
Place the working stand on a solid, flat and level
surface. When the working stand can shift or rock, the
power tool or workpiece cannot be steadily and safely
controlled.
Do not overload the working stand or use as ladder
or scaffolding. Overloading or standing on the working
stand causes the stand to be "top-heavy" and likely to
tip over.
BELT SANDER SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces,
because the sanding surface may contact its own
cord.
parts of the power tool "live" and could give the operator
an electric shock.
ADDITIONAL SAFETY WARNINGS
Clamp
workpiece
with
damage. Do not hold the material you are sanding by
hand.
Do not use sanding belt larger than needed.
Always wear safety goggles and a dust mask.
A suitable breathing respirator must be worn while
sanding lead paint, some woods and metal to avoid
breathing the harmful/toxic dust or air.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise and the operator
should pay special attention to avoid the following:
–
Especially during inverted operation, additional
fingers and hands from coming into contact with the
abrasive belt or entrapped by the rollers. Use the
fence accessory whenever possible to help control
the workpiece and prevent entrapment with the
moving roller.
–
Using the product will produce considerable amount
of dust and fine particles. Use the dust collection
operating the product. Wear dust masks containing
filters appropriate to the materials being worked
on. Ensure adequate workplace ventilation. Do not
eat, drink, or smoke in the work area. Only operate
on materials which are specified in the Intended
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
a
clamping
device.
EL
English |
1
Publicité
