Publicité
8. Disposal and recycling
The equipment is supplied in packaging to
prevent it from being damaged in transit. The
raw materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Empty the cooler/warmer box and remove the
power cable, 12V power cable and battery. Store
the power cables in the front pocket. Clean and
dry the device as described above, leave the
lid open to prevent mold from growing. Use the
carry-handle as a brace to keep the lid open.
Store the equipment and its accessories out
of children's reach in a dark and dry place at
above freezing temperature. The ideal storage
temperature is between 50°F and 104°F (10°C
and 40°C). Keep the electric tool in its original
packaging.
10. Troubleshooting
The cooler/warmer box does not work
A) Main power source (120V ~ 60 Hz)
Check whether the plug is properly inserted in
the socket outlet and that the socket outlet is
energized.
B) 12V Power supply
•
Check whether the 12V power plug is
properly inserted in the 12V socket and that
the 12V socket is energized.
•
Check whether the fuse in the 12V power
plug is defective. Refer to Chapter "7.2
Replacing the fuse in the 12V plug" to change
the fuse.
C) 18V Battery power
•
Check whether the battery is empty.
Recharge the battery.
Anl_TE_COL_18_27_Li_NA_SPK7.indb 15
Anl_TE_COL_18_27_Li_NA_SPK7.indb 15
EN
The reprinting or reproduction by any other
means, in whole or in part, of documentation
and papers accompanying the products is
strictly subject to the express consent of Einhell
Germany AG.
Subject to technical changes.
- 15 -
07.03.2025 11:10:03
07.03.2025 11:10:03
Publicité
