Publicité
rain. This device is not suitable for use as seating
or storage.
Please follow the specifi c regulations and laws in
each country.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
This machine is not allowed to be used by
persons (including children) with reduced
physical, sensory, mental capacities or those with
a lack of experience and knowledge.
4. Technical data
Voltage: ............................................ 120V, 60 Hz
Cooling/warming
energy consumption: ........................ 55 W / 50 W
Voltage: ............................................... 12V
Cooling/warming
energy consumption: ........................ 48 W / 42 W
Miniature fuse: ............................................ 6.3 A
Gross container capacity: ........ 27 L (28.5 quarts)
Ambient temperature range: ...... 60.8°F to 89.6°F
...................................................... (16°C to 32°C)
Operating temperature range: ....... 41°F to 140°F
........................................................ (5°C to 60°C)
Weight: ....................................................13.2 lbs
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
•
Wear gloves.
Anl_TE_COL_18_27_Li_NA_SPK7.indb 12
Anl_TE_COL_18_27_Li_NA_SPK7.indb 12
EN
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
Limit the operating time.
All stages of the operating cycle must be
considered (for example, times in which the
electric tools are switched off and times in which
the tool is switched on but operates without load).
5. Before starting the equipment
•
Check the cooler/warmer box for damage.
A damaged cooler/warmer box must not be
used.
•
For hygiene reasons, clean the cooler/
warmer box before using it for the first time.
In this regard, please refer to Chapter "7.1
Cleaning".
5.1 Fitting the battery (Fig. 3-4)
Pull the pocket (Fig. 1 / Item 2) forward, unzip it
and push the battery into the mount (Item 19)
provided. Make sure that the pushlock button
(Item 21) engages properly! Close the zipper on
the pocket.
To remove the battery, proceed in reverse order!
5.2 Filling the cooler/warmer box
CAUTION – Risk of damage to health!
To prevent food contamination, follow the
instructions below:
•
Leaving the lid open for prolonged
periods can lead the temperature in
the compartments of the device to rise
considerably.
•
Regularly clean any surfaces that may come
into contact with food.
•
Store raw meat and fish in suitable containers
so that they do not come into contact with or
drip on other food items.
- 12 -
07.03.2025 11:10:03
07.03.2025 11:10:03
Publicité
