Publicité
Note:
If you do not select a cooking zone within 1 minute, the appliance automatically switches off.
USING A COOKING ZONE
Selecting a cooking zone
1. Put a pan on the cooking zone.
2. Touch the selection button of the cooking zone.
3. Touch the slider to increase and decrease the power level. The operation indicator shows the set power level.
Note:
If you do not select a power level within 1 minute, the appliance automatically switches off.
Stopping a cooking zone
1. Touch the slider to decrease the power level to 0.
Note:
The operation indicator shows H to indicate the cooking zone is still hot.
Note:
Always lift the pan off the appliance, do not slide it, or it may scratch the glass.
USING THE BOOSTER MODE
The booster mode provides extra power to a cooking zone and can be activated for both cooking zones at the same time.
Note:
If you select another cooking zone during the booster mode, the power is more than the maximum available power of
the appliance. The booster mode stops automatically.
Starting the booster mode
1. Select a cooking zone.
2. Touch the booster button B to set the power level to the maximum. The operation indicator shows P.
The booster mode now works for 5 minutes. After 5 minutes, the power level returns to it's original setting.
Stopping the booster mode
1. Select the cooking zone with the active booster mode.
2. Touch the booster button B to cancel the booster mode. The operation indicator shows the set power level.
USING THE PAUSE MODE
1. Touch the pause button to start the pause mode. The operation indicator shows II.
The power level of the cooking zone is now reduced.
2. Touch the pause button again to stop the pause mode.
The power level of the cooking zone is now set to the previously selected power level.
LOCKING AND UNLOCKING THE APPLIANCE
When the appliance is locked, you cannot operate the touch buttons.
Locking the appliance
1. Make sure that the appliance is on.
2. Touch the child lock button. The operation indicator shows Lo when the appliance is locked.
Unlocking the appliance
1. Make sure that the appliance is on.
2. Touch the child lock button again for a few seconds. The operation indicator stops showing Lo when the appliance is
unlocked.
USING THE COOKING TIMER
Note:
You can use the timer with different settings simultaneously for more than one cooking zone.
Note:
When the timer finishes, the timer display shows "--" and you hear a sound signal.
Note:
The cooking zone will automatically switch off when the timer is finished.
23
English
•
Publicité
