Honda EU10i Manuel De L'utilisateur page 31

Output and Overload Indicators
The Output indicator (green) will remain ON during normal operating
conditions.
In addition, the Output indicator has a simplified hour meter function. When
you start the engine, the indicator blinks according to the generator's
cumulative operating hours as follows:
• No blinks: 0–100 hours
• 1 blink: 100–200 hours
• 2 blinks: 200–300 hours
If the generator is overloaded (in excess of 1.0 kVA), or if there is a short in the
connected appliance, the Output indicator (green) will go OFF, the Overload
indicator (red) will go ON and current to the connected appliance will be shut
off.
Stop the engine if the Overload indicator (red) comes ON and investigate the
overload source.
• Before connecting an appliance to the generator, check that it is in good
order, and that its electrical rating does not exceed that of the generator. Then
connect the power cord of the appliance, and start the engine.
OUTPUT INDICATOR (GREEN)
NOTE:
When an electric motor is started, both the Overload indicator (red) and the
Output indicator (green) may go ON simultaneously. This is normal if the
Overload indicator (red) goes OFF after about 4 seconds. If the Overload
indicator (red) stays ON, consult your generator dealer.
28
• 3 blinks: 300–400 hours
• 4 blinks: 400–500 hours
• 5 blinks: 500 or more hours
OVERLOAD INDICATOR (RED)