shark AERON Mode D'emploi page 27

7 – Once the SENA FOR SHARK (Bluetooth or Mesh) system is installed in the helmet,
replace the gasket and screw it back in using the 3 hex screws. Then replace the 2 side
covers.
8 - Replace the textile foams (cheeks and liner) according to the textile reassembly
description on page 10, ensuring that all the cables of the SENA FOR SHARK system
are positioned inside the textile parts and do not protrude from the helmet once
reassembled
5 - Make the rest of the connections
between the speakers, microphone, battery
and keyboard as described in the SENA
FOR SHARK (Bluetooth or Mesh) user
manual. Place the cables between the shell
and the polystyrene sections, using the
housings provided for this purpose (Fig 34).
6 - Insert battery here (Fig.34).
Fig. 34
Fig. 35
27