shark AERON Mode D'emploi page 14

INTERIOR ASSEMBL
CONTINUED
11 to 14 - Turn the helmet over to access
the front of each cheekpiece to be able
to redo each of the two fastening snaps:
one snap at the back and one at the front.
CAUTION! The positioning of the
interior is critical for eeping the
helmet on your head. If you are unsure
about disassembling or reassembling the
interior, do not use your helmet. Contact
your retailer for assistance and advice.
Never use a helmet missing any part
ma ing up its interior, it
you in the event of an accident.
CAUTION!
liner are made to fit perfectly on
your head. In the event of an accident,
a helmet that does not fit you may come
off, leaving your head unprotected and
causing serious or even fatal injuries.
If y ou are not sure that the interior has
been reassembled correctly, do not use
your helmet. Contact your retailer for
assistance and advice.
14
ill not protect
The shell and inner
13
11
12
14