Textiles; Interior Cleaning - Shark Aeron Mode D'emploi

INTERIOR CLEANING

The internal textile parts are washable.
In order not to damage them it is
important to carefully follow the
advice below:
The cheek pads and liner should be
washed by hand in lukewarm, soapy
water (approximately 30°C). Do not
use aggressive detergent products.
Use either a small amount of detergent
for delicate textiles or Marseille soap.
It is essential to dry the textiles and
foams completely before use. They
must be dried at room temperature.
Never iron textile items. For leather-
look or textile parts attached to safety
elements, use a slightly damp sponge
or cloth with a little Marseille soap,
then rinse with plain water.
Avoid using too much water on
polystyrene elements.
It is essential to ensure that all interior
parts are perfectly dry before using
the helmet.
CAUTION!
interior foams compromises
the correct size of your helmet. If it
no longer fits your head, the helmet
may come off, leaving your head
unprotected and causing serious,
even fatal injury.
Damaging the

TEXTILES

The comfort textiles and foams of
the AERON will allow you to better
appreciate the performance of your
helmet. The parts in contact with your
skin are made of a fabric that ensures
comfortable contact, good perspiration
absorption and good resistance to
aging. Our fabrics that contact the skin,
are treated to limit the proliferation of
bacteria, and therefore, bad odours.
CAUTION!
f or their qualities o f stren g th
and durability over time, all parts of
the interior covering are subject to
normal ear depending on care and
maintenance, duration of use as ell as
the acidity of your s eat. If you notice
aging, e advise you to replace your
interior fittings in order to maintain
a perfectly clean helmet over time
and ensure the necessary comfort.
our retailer ill be able to offer you
replacement parts, and also optionally
offer you chee
thic nesses and densities in the event
that the standard choice does not suit
your face shape.
WARNIN ! Every time you put
on your helmet, ensure that it fits
your head.
Althoug h selected
pads of different
15