Publicité
SAFETY PRECAUTIONS
It is really important that you read Safety Precautions Before Operation and
Installation. Incorrect installation due to ignoring instructions can cause serious
damage or injury. The seriousness of potential damage or injuries is classified as
either a WARNING or CAUTION.
Explanation of Symbols
WARNING
This symbol indicates the possibility of personnel injury or loss of
life.
CAUTION
This symbol indicates the possibility of property damage or serious
consequences.
WARNING
This appliance is not intended for use by persons(including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that
they do not play with the appliance.
ELECTRICAL WARNINGS
Only use the specified wire. If the wire is damaged, it must be replaced by the
●
manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
The product must be properly grounded at the time of installation, or electric
●
shock may occur.
For all electrical work, follow all local and national wiring standards, regulations,
●
and the Installation Manual. Connect cables tightly, and clamp them securely to
prevent external forces from damaging the terminal. Improper electrical
connections can overheat and cause fire, and may also cause shock. All electrical
connections must be made according to the Electrical Connection Diagram
located on the panels of the indoor and outdoor units.
All wiring must be properly arranged to ensure that the control board cover can
●
close properly. If the control board cover is not closed properly, it can lead to
corrosion and cause the connection points on the terminal to heat up, catch fire,
or cause electrical shock.
Disconnection must be incorporated in the fixed wiring in accordance with the
●
wiring rules.
Do not share the electrical outlet with other appliances. Improper or insu cient
●
power supply can cause fire or electric shock.
If connecting power to fixed wiring, an all-pole disconnection device which has
●
at least 3mm clearances in all poles, and have a leakage current that may exceed
10mA, the residual current device(RCD) having a rated residual operating current
not exceeding 30mA, and disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
02
Publicité
