Télécharger Imprimer la page

Proline DWP12DWH Manuel D'utilisation page 139

Publicité

The dishwasher is noisy.
The dishes are not clean.
Cloudiness on glassware
White spots appear on
dishes and glasses
The dishes are not quite dry.
Error messages
When some malfunctions occur, the corresponding indicator light will flash
quickly to warn you.
Indicator light flashing quickly
+
+
+
FR
136
Dishes are rattling against each
other.
The spray arm is knocking
against the dishes.
The dishes have not been
arranged properly.
The washing program selected
is too gentle.
Not enough detergent has been
used or it is unsuitable.
The spray arm is clogged.
The filters are not clean or not
in the correct position.
Combination of soft water and
too much detergent
Hard water area can cause
limescale deposits.
Improper loading
The rinse aid has run out or too
little is being used.
Wrong program has been
selected.
Meanings
Longer inlet time.
Not reaching required
temperature
Overflow
Failure of communication
between main circuit board with
display circuit board
NL
Refer to "Loading the Dishwasher" to rearrange
the dishes.
Refer to "Loading the Dishwasher".
Select a more intensive program.
Refer to "Washing Programs".
Use more detergent or change the detergent.
Rearrange the items so that the spray arm can
rotate freely.
Clean and/or position the filters correctly.
Use less detergent if you have soft water and
select a shorter cycle to wash the glassware and
to get them clean.
Add more detergent.
Refer to "Loading the Dishwasher".
Increase or refill the amount of rinse aid.
Choose a program with long washing time.
Possible Causes
Tap is not opened, or water inlet is restricted, or
water pressure is too low.
Malfunction of heating element
Some dishwasher parts are leaking.
Open circuit or break wiring for the
communication.
EN
PT

Publicité

loading

Ce manuel est également adapté pour:

Dwp12dsl