Publicité
this is the case, follow the instructions below:
1. Press
to pause.
2. Wait for 5 seconds then open the door.
3. Add the forgotten dishes.
4. Close the door.
5. Press
. The cycle will start from the point at which it was interrupted.
Changing the program in progress
A wash cycle can only be changed if it has been running for a short time
otherwise, the detergent may have already been released and the dishwasher
may have already drained the wash water. If this is the case, the dishwasher
needs to be reset and the detergent dispenser must be refilled. To reset the
dishwasher, follow the instructions below:
1. Press
to pause.
2. Press and hold
for more than 3 seconds – the program will cancel. You will
hear a beep.
3. Repeateldy press
4. Press
to start the new program.
Child lock function
The child lock function of your dishwasher prevents accidental program changes
and stops children playing with the controls while the appliance is running.
To activate the function, press and hold
indicator light illuminates.
To deactivate the function, press and hold
lock indicator light goes out.
FR
to select a new program.
and
and
NL
PT
simultaneously until the lock
simultaneously until the
EN
129
Publicité
