Publicité
NOTE: Clean up any spilled rinse aid with an absorbent cloth to avoid excessive
foaming during the next wash.
Adjusting the rinse aid dispenser
To achieve a better drying performance with limited rinse aid, the dishwasher is
designed to adjust the consumption by user. Follow the below steps:
1. Close the door and switch on the dishwasher.
2. Within 60 seconds after powering on the dishwasher, press and hold
about 5 seconds and then press
FR
122
2. Pour the rinse aid into the dispenser,
being careful not to overfill.
3. Close the cap.
to enter the setting mode.
NL
PT
for
EN
Publicité
