USING THE WATER SOFTENER
The hardness of the water varies from place to place. If hard water is used in the
dishwasher, deposits will be formed on the utensils. This appliance is equipped
with a water softener which uses a salt specifically designed to eliminate the
minerals from the water.
CAUTION:
•
Only use salt specially formulated for domestic dishwashers.
•
Do not use table salt as it contains insoluble substanes which may damage
the water softening system.
•
Fill the salt container before starting the washing program. In this
way, the excess saline solution will be immediately removed by the water;
the prolonged presence of salt water inside the tank may lead to corrosion.
Adjusting the salt consumption
1. Close the dishwasher door. After the dishwasher is switched on, enter the
status of adjusting the salt consumption by holding down
until the indicator lights
2. Repeatedly press
3. Press
to validate settings.
WATER HARDNESS
°d H
°f H
° Clarke
0 – 5
0 – 9
0 – 6
6 – 11
10 – 20
7 – 14
12 – 17
21 – 30
15 – 21
18 – 22
31 – 40
22 – 28
23 – 34
41 – 60
29 – 42
35 – 55
61 – 98
43 – 69
FR
and
illuminate.
to adjust the setting to suit the water hardness.
Regeneration occurs
Indicator
light
mmol / l
illuminating
0 – 0,94
1,0 – 2,0
2,1 – 3,0
3,1 – 4,0
4,1 – 6,0
6,1 – 9,8
NL
PT
5 seconds
Salt
every X program
consumption
sequence
(gram / cycle)
1)
No regeneration
10
5
3
2
1
EN
0
9
12
20
30
60
119