Getting Started; Inserting The Batteries; Replacing The Batteries; Manually Setting The Date/Time - Hama Th-10 Mode D'emploi

Warning – Batteries
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a re.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow
them to enter the environment. They can contain toxic,
environmentally harmful heavy metals.
• Immediately remove and dispose of dead batteries
from the product.
• Avoid storing, charging or using the device in extreme
temperatures and extremely low atmospheric pressure
(for example, at high altitudes).

4. Getting started

4.1. Inserting the batteries

• Open the battery compartment (15), insert the battery/
batteries, ensuring that the batteries are inserted
correctly in terms of polarity, and then close the battery
compartment (15). The thermometer is now ready for use.

4.2. Replacing the batteries

• Open the battery compartment cover (15), remove and
properly dispose of the depleted batteries, and insert two
new AAA batteries with the correct polarity. Then close
the battery compartment cover.
5. Mounting
You can either stand the thermometer on an even surface
using the fold-out stand (14) on the back of the device,
or attach it to a wall using the opening (13) on the back
of the device.
Warning
• Before mounting, check that the wall you have chosen
is suitable for the weight to be mounted Also make
sure that there are no electric, water, gas or other lines
running through the wall at the mounting site.
• Do not mount the product above locations where
persons might linger.
6. Operation

6.1. Manually setting the date/time

Time/date
• Press and hold the
seconds until the year ashes.
• Press the (4) or
individual values.
• Set the following information in the order listed:
• year, month, day, language for day of the week, display
in °C or °F, 12 or 24-hour format, time
• Press the SET button (5) to adopt the set value displayed
and go to the next item.
Note
Hold the button (4) or the
the values faster.
Note
• The weekday is set automatically when setting the
date manually.
• If you do not make an entry for several minutes, you
automatically exit the setup mode. The settings that
were made up to that point are not saved!
Note - Day of the week.
• For the day of the week display, you can choose from
the following languages: German (GER), English
(Eng), Dutch (NET), Italian (ITA), Spanish (ESP), Danish
(DAM) or French (FRE).
button (5) for approximately 2
(3) button to select the
button (3) to select
3