Publicité
Lap/Shoulder Belt (Rear-Facing and Forward-Facing)
NEVER install this Car Seat using a
non-locking vehicle lap/shoulder belt.
NOTE: A locking clip may be needed
(see pg. 29). Refer to your vehicle
Owner's Manual for information.
12. Pull the Tether Adjuster Strap to
tighten.
13. Install Seat Shell to Base (pg. 57),
move Seat Shell to the appropriate
REAR-FACING
FACING
position based on the child's
size (see pgs. 10 and 12), and lock
into position.
14. Confirm that the seat is in a locked
position by checking that the Seat
Lock Indicator is GREEN.
64
Installing Lap/Shoulder Belt (Preferred Method)
FORWARD-
or
Publicité
