GE RAK149F2A Manuel D'utilisation Et Instructions D'installation page 5

INSTALLATION INSTRUCTIONS
INSTALLER MENU (cont)
Installer's Description
Menu #
(Hold Menu
3 Seconds)
20 Algorithm – AC or HP (If HP
is selected, item #32 will be
displayed)
CR Heat Cycle Rate (how often the
30
heat will turn on)
Aux Cycle Rate (how often the
CR
32
auxiliary heat will turn on)
Note: Available if HP is selected
on item #20
Cool Cycle Rate (how often the
CR
35
cooling will turn on)
CL Compressor Lockout (protects
50
the compressor from short
cycling)
65 Maximum Heat Limit (maximum
set point for heat mode)
66 Minimum Cool Limit (minimum
set point for cool mode)
79 Fahrenheit or Celsius
81 Temperature Display
Adjustment (adjust the displayed
"Room Temperature")
dL Continuous Display Light (keep
83
the backlight always on – "C" wire
required)
49-5000769 Rev. 1
Default Settings
Setting
(flashing icons)
HP HP – Heat Pump or
AC – Air Cond.
SLO SLO – slow
MEd – medium
FAS – fast
SLO SLO – slow
MEd – medium
FAS – fast
SLO SLO – slow
MEd – medium
FAS – fast
OFF On – 5 minute delay
OFF – no delay
85°F 45°F to 99°F
60°F 45°F to 99°F
°F °F – Fahrenheit
°C – Celsius
0 -5 to +5
OFF On – always on
OFF – momentarily on
for 8 seconds
5