VERITAS Florence Mode D'emploi page 80

1
7. Slowly press down the foot control or
press the start/stop button to start sewing.
Release the foot control or press the start/
stop button again to stop the machine.
You can use reverse sewing for back
tacking and reinforcing seams by pressing
the reverse button. Please refer to "Useful
skills" chapter for more information.
8. Press the needle up/down button to raise
the needle. Raise the presser foot lifter
and remove the fabric.
9. Guide both threads to the side of the face
plate and into the thread cutter to cut
them.
①
Thread cutter
74
Note