VERITAS Florence Mode D'emploi page 75

3. Needle up/down position button
In sewing mode, with the needle up/down
position button, you decide whether the
needle stops in the highest or in the lowest
position (i.e. in the fabric) when you stop
sewing.
During sewing, press the needle up/down
button, the machine will stop automatically.
4. Thread cutter button
Press this button after finishing sewing and
the machine will trim the thread.
5. Auto-lock button
When machine is not sewing: Press the auto
lock button, machine will sew 3 stitches in the
same position then stop.
During machine is sewing: When A group
patterns 01-06 are selected and the auto-
lock button is pressed, the machine will
sew 3 locking stitches. Then it will stop
automatically.
During machine is sweing: When A group
patterns 07-19, 28-55 and B group patterns
01-65 are selected and the auto-lock button
is pressed, the machine will sew 3 locking
stitches at the end of the current pattern.
Then it will stop automatically. The function
will be cancelled if you press the button once
again or select another pattern.
In embroidery mode, press this button to
move the embroidery carriage to left side, and
it will be easier for you to change the thread.
Press the button again, the embroidery
carrriage will be back to the original position.
69
Note
EN