Publicité
Using the Timer
You can use the timer in two different ways:
·You can use it as a minute reminder. In this case, the timer will not
turn any cooking zone off when the set time is up.
·You can use it as cut-off timer to turn one or more cooking zones off
after time is up.
·You can set the timer up to 99
Using the timer as a Minute Reminder
1.
Make sure the cooktop is turned on. And zone
selection key is not activated (zone indication '-'
is not blinking).
Note:you can set minute reminder before or after
cooking zone power setting finished.
2.
Touch the "-" or "+" of the
indicator will start flashing and "30" will show in the
timer display.
3.
Set the time by touching the "-" or " "+" control of
timer.
Hint: Touch the "-" or "+" control to decrease or
increase by 1 minute.
Hold the "-" or " + " control to decrease or
increase by 10 minutes.
If the setting time exceeds 99 minutes,the timer
will automatically return to 0 minutes.
4. Cancel the time by touching the "-" of the
timer and scrolling down to "0".
5.
When the timer is set, it will begin to count down
immediately. The display will show the remaining
time and the timer indicator will flash for 5
seconds.
6. Buzzer will beep for 30 seconds and the timer
indicator shows "- -" when the setting time
finished.
minutes.
timer key, the reminder
EN-19
Publicité
