Publicité
How Induction Heating Works
To Start Cooking
After power on, the buzzer beeps once, all the indicators light up for 1
second then go out, indicating that the hob has entered the state of
standby mode.
Touch the ON/OFF switch, all the indicators
1.
show '—' or '— —'.
Place a suitable pan on the cooking zone
2.
that you wish to use. Make sure the bottom
of the pan and the surface of the cooking
zone is clean and dry.
Select a heat zone and setting by touching
3.
the 'slider',or slide along the slider control,or
just touch any point of the slider.
a. If you don't set the power within 1 minute,
the induction hob will automatically
switch off. You will need to start again at
step 1.
You can modify the heat setting at any time
b.
during cooking.
c. If slide along the slider,power will vary from
stage 1 to stage 9.
EN-15
Or
Publicité
