Publicité
NOTE
►
The bag opening must lie fl at on the sealing wire 4. Otherwise the weld-
ing does not work properly.
4) Close the appliance lid 1. The press seal q presses the bag onto the
sealing wire 4 to create a smooth seam. Ensure that both corners of the
appliance lid 1 click closed. If necessary, press them down once again on
the markings
locks shut.
5) Press the
process is completed, the control lamp w fl ashes briefl y and then goes out.
NOTE
►
You can halt the sealing process at any time by pressing the
The control lamp w fl ashes and then goes out.
│
GB │ IE
■
10
and
so that the appliance lid 1 clicks into place and
button w. The control lamp w lights up. As soon as the sealing
button z.
Publicité
