Frequency Search Function; Switching The Hd Radio™ Signal; Cd/Mp3/Wma; Playback - Alpine CDA-9856 Mode D'emploi

Frequency Search Function

You can search for a radio station by its frequency.
1
Press and hold for at least 2 seconds in Radio
mode to activate Frequency Search mode.
2
Turn the Rotary encoder to select the desired
frequency.
Only when the Radio mode is active
* Operation is not required during HD Radio reception.
3
Press MODE to receive the selected frequency.
• Press and hold for at least 2 seconds in the search mode to
cancel. Or the search mode will be canceled when an operation has
not been performed in 10 seconds.
Switching the HD Radio™ signal
HD Radio™ can be received if the HD Radio TUNER MODULE
(TUA-T500HD) is connected. While receiving HD Radio, the unit can
automatically switch between the analog and digital signal. You can
also switch to the analog signal exclusively.
1
When receiving HD Radio, press FUNC. to select
on.
The currently received status is displayed.
2
Press preset 1 to switch the receiving signal.
DIG/ANA MODE ANALOG ONLY
DIG/ANA MODE: Automatically switches between digital and
analog signal
ANALOG ONLY: Receives analog signal only
3
Turn off the "
• Select mode will be canceled when an operation has not been
performed in 10 seconds.
*
" indicator by pressing FUNC.

CD/MP3/WMA

(OPEN)
SOURCE/
Rotary
POWER
encoder
MODE

Playback

1
Press (OPEN).
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Close the front panel manually.
When a disc is already inserted, press SOURCE/POWER to
switch to the CD mode.
TUNER XM RADIO/SIRIUS*
3
CHANGER* TUNER
1
* Only when XM Radio or Sirius Radio is connected.
2
* Only when the iPod is connected.
3
* Only when the CD changer is connected.
3
While playing back MP3/WMA, press
select the desired folder.
Pressing and holding
continuously.
4
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
5
To pause playback, press
Pressing / again will resume playback.
6
After pressing (OPEN) to open the front panel,
press to eject the disc.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
/
FUNC. 4 5 TITLE
1 2
DISC IPOD*
or to
or will change folders
/ .
9
-EN