Storing Channel Presets; Receiving Stored Channels; Category/Channel Search Function; Quick Search Function - Alpine CDA-9856 Mode D'emploi

3
Turn the Rotary encoder to set the tuning method.
CH NO: Set in order of channel No.
ALPHABET: Set in alphabetic order.
4
Press MENU to select RETURN.
After 2 seconds, the unit returns to normal mode.
Pressing and holding MENU for at least 2 seconds will
return to normal mode.
• When the setting is completed, switch the channel DOWN/UP by
pressing the or

Storing Channel Presets

1
Press BAND to select the desired band you want to
store.
2
After tuning in the desired channel, press and hold,
for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to store
the channel.
The selected station is stored.
3
Repeat the procedure to store up to 5 other channels
onto the same band.
• To use this procedure for other bands, simply select the band desired
and repeat the procedure.
• A total of 18 channels can be stored in the preset memory (6 channels
for each band; XM1, XM2 and XM3 or SR1, SR2 and SR3).
• If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.

Receiving Stored Channels

1
Press BAND to select the desired band.
2
Press the channel preset button that has your
desired satellite channel in memory.

Category/Channel Search Function

You can search for programs by Category or Channel No.
1
Press in the XM or SIRIUS mode.
2
Turn the Rotary encoder to select Category Search
mode or Channel Search mode, then press
Category Search mode:
3
Turn the Rotary encoder to select the desired
Category, then press
20
-EN
.
.
4
Turn the Rotary encoder to select the desired
Channel No. or Channel Name, then press MODE.
• Search items vary depending on the setting in "Setting the Tuning
Method" (page 19).
When "CH NO" is selected: Channel No. Search
When "ALPHABET" is selected: Channel Name Search
• While in Category Search mode, press FUNC. to return to the
selecting search mode.
• The Search mode is canceled if you press and hold
seconds, or no operation is performed for 10 seconds in Category
Search mode.
Channel Search mode:
3
Turn the Rotary encoder to select the desired
Channel No. or Channel Name, then press MODE.
• Search items vary depending on the setting in "Setting the Tuning
Method" (page 19).
When "CH NO" is selected: Channel No. Search
When "ALPHABET" is selected: Channel Name Search
• While in Channel Search mode, press
Category.
• While in Channel Search mode, press FUNC. to return to the
selecting search mode.
• The Search mode is canceled if you press and hold
seconds, or no operation is performed for 10 seconds in Channel
Search mode,

Quick Search Function

You can search for all Channels.
1
Press and hold
SIRIUS mode to activate Quick Search mode.
2
Turn the Rotary encoder to select the desired
Channel within 10 seconds.
The selected Channel is received.
Receiving Weather or Traffic information
from SAT Radio
1
Press and hold
or SIRIUS mode.
The received weather or traffic channel is stored.
2
.
Press and hold BAND for at least 2 seconds.
The stored Weather or Traffic channel will be recalled.
3
Press and hold BAND for at least 2 seconds.
Returns to normal mode.
• Stored channels can also be recalled by pressing and holding BAND
for at least 2 seconds, except when in XM or SIRIUS mode.
• The channel excluding the Weather or Traffic information can be
stored and recalled.
for at least 2
or to select another
for at least 2
for at least 2 seconds in XM or
/ for at least 2 seconds in the XM