Search Function; Rear Entertainment Function; Switching The Function Of The Remote Sensor - Alpine IVA-W200 Mode D'emploi

Search Function

1
Touch [ ] on the function guide while in the CD or
MP3/WMA mode.
Search list screen is displayed.
Select a desired track or folder.
Touch [ ] for direct playback.
When a hierarchical list is prepared, [
displayed. Touch [
hierarchy list screens.
Display Example for Search Screen
[ ] is displayed if there is a hierarchical list.
Select directly by touching [ ], and its track (or folder/
file) is played back.
Scroll the list one paragraph at a time by touching [
or [ ].
Touch and slide up or down to scroll the list backwards
or forwards.
UP/DOWN scroll indicator
Turns orange when the slide bar is used.
Touch [ ] to return to the previous list screen.
RETURN
• The search function does not work on the DVD, video CD or CD
changer.
• A folder list is displayed only during MP3/WMA playback when the
DVD player (DVA-5210) or changer compatible with MP3 is
connected.
Internal CD player mode
1 The track list* screen appears.
* If the CD is text compatible only.
2 Touch [ ] of a desired track text*.
The selected track will be played back.
• "TRACK" is displayed in the track text list if there is no text
on the disc.
Internal MP3/WMA Player/external MP3-compatible DVD
Player/Changer Mode
1 The folder list screen appears.
Select a desired folder and then touch [
([ ] appears only when a file is present in the selected
folder.)
The file list screen is displayed.
• Touch [ ] to play back the folder directly.
2 Touch [ ] of a desired file name.
The selected file will be played back.
] will be
] to display the respective
].

Rear Entertainment Function

The rear entertainment function independently routes different sources
to the front and the rear inside a car. For example, while listening to the
radio or other audio source in the front, DVD can be enjoyed in the rear
with the optional rear monitor and headphones.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [REAR SELECT].
Rear Select display appears.
• This function cannot be used when MONITOR OUT is set to
OFF in the SYSTEM SETUP.
3
Touch the desired source such as visual (auxiliary
input, built-in DVD) to select.
• Touch [OFF] to cancel the rear entertainment function.
• When the "Setting the AUX Mode" (page 34) is set to OFF, the
auxiliary source is not displayed.
Switching the function of the remote
sensor
For remote control operation, the remote sensor of the external device
(monitor, etc.) can be switched, as you prefer.
4
Touch [FRONT], [REAR].
]
The monitor which has a priority to the remote control
operation is changed.
FRONT: The remote sensor of this unit is effective.
REAR: The remote sensor of the external monitor
connected to AUX OUT of this unit becomes
effective, and the remote control can be
operated only for the source selected for the
terminals.
• The sensor of the touch panel rear monitor has priority over the
sensor of the remote control, if the rear monitor (connected to the
Alpine touch panel rear monitor via the Monitor control lead) is
touched, regardless of the remote control sensor switch setting. Note,
however, that the sensor of the remote control that has been set takes
priority if it has been 5 seconds since last touching the panel.
• When an optional DVD changer or DVD player is connected, and the
remote control sensor is set to REAR, some soft button operations (
[ ] STOP, etc.) cannot be performed.
In this case, set the remote control sensor to FRONT.
25
-EN