Setting The Scroll; Setting The Auxiliary Data Field Display; Playing Mp3/Wma Data (Play Mode); Adjusting The Dimmer Of Button Lighting At Night - Alpine IVA-W200 Mode D'emploi

Setting the Scroll

Scroll display is available if CD text, folder name, file name or tag
information is entered.
Setting item: AUTO SCROLL
Setting content: OFF / ON
ON: Turns on the AUTO scroll mode. Scroll display is
repeated as long as the mode is turned on.
OFF: Turns off the AUTO scroll mode.
Scroll display is done once as a track is changed.
• Scroll display of the song, artist and album name is enabled when
iPod is connected.
• Short/Long Station name, Song, Artist, and album name scrolling are
displayed in HD Radio mode.

Setting the Auxiliary Data Field Display

This display can be used only when the optional XM Satellite Radio
Receiver is connected.
Setting item: ADF
Setting content: OFF / ON
ON: The Auxiliary Data Field is displayed in the XM mode.
OFF: The Auxiliary Data Field is not displayed.

Playing MP3/WMA Data (Play Mode)

This product can play back CDs containing both CD and MP3/WMA
data. However, in some situations (some enhanced CDs), playback may
be difficult. For these special cases, you can select playback of CD data
only. When a disc contains both CD and the MP3/WMA data, playback
starts from the CD data portion of the disc.
Setting item: PLAY MODE
Setting content: CD / CMPM
CD: Only CD data can be played back.
CMPM: Both CD data and MP3/WMA file tracks can be played
back.
• Insert the disc when playback is stopped and remove the disc from
the unit before setting.
• When an MP3-compatible CD changer is used, this setting cannot be
applied.
Adjusting the Dimmer of Button Lighting at
Night
You can adjust the brightness of the button lighting at night with the
dimmer.
Setting item: LED DIMMER LEVEL
Setting level: -2 to +2
• The adjustment is available when ON or AUTO is set in "Setting the
Brightness of the Backlighting" (page 36).

SYSTEM Setup

System Setup Operation

To display the System mode screen:
To watch a video source, your vehicle must be parked with the
ignition key in the ACC or ON position. To do this, follow the
procedure below.
1 Bring your vehicle to a complete stop at a safe
location. Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second
time, release the foot brake.
• For automatic transmission vehicles, place the transmission lever
in the Park position.
Now, the locking system for the System mode operation has been
released. Engaging the parking brake can reactivate the System
mode, as long as the car's ignition has not been turned off. It is
not necessary to repeat the above procedure (1 through 3) of "To
display the System mode screen."
Each time the ignition is turned OFF, perform the procedure of "To
display the System mode screen."
The following steps 1 to 5 are common operations to each
"Setting item" of SYSTEM Setup. Refer to each section for
details.
1
Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2
Touch [OTHER SETUP].
The OTHER SETUP screen appears.
3
Touch [ ] of SYSTEM SETUP.
The SYSTEM setup screen appears.
4
Touch [ ], [ ] or [OFF], [ON], etc., of the desired
item to change its setting.
Setting items:
IN INT. MUTE / IN INT. ICON / NAV. IN / NAV. MIX / AUX IN /
*1
AUX IN LEVEL / CAMERA IN / MONITOR OUT / VISUAL KEY
/ OPTICAL OUT / SUBWOOFER
*1
Not displayed when OFF is set in "Setting the AUX Mode" (page
34).
*2
Not displayed when an external audio processor is connected.
*3
Not displayed when OFF is set in "Setting the Navigation Mode"
(page 34).
5
Touch [RETURN] to return to the previous screen.
Touch [CONTROL] to return to the main source screen that
was displayed before the setup operation was started.
• Immediately after changing the settings of System Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
*3
*2
33
-EN