Frequency Search Function; Changing The Display (Hd Radio Mode Only); Receiving A Multicast Station (Hd Radio Mode Only) - Alpine iDA-X200 Mode D'emploi

Frequency Search Function

You can search for a radio station by its frequency.
1
Press /ENTER in Radio mode to activate
Frequency search mode.
2
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select the
desired frequency.
3
*
Press /ENTER to receive the selected frequency.
* Operation is not required during HD Radio reception.
• Press in the search mode to cancel. Or, the search mode will be
canceled if no operation is performed for 10 seconds.
Receiving a Multicast Station
(HD Radio mode only)
Multicasting which is the Ability to broadcast multiple program streams
over a single FM frequency thereby increasing the amount and diversity
of content choices. A maximum of eight multicast station channels can
be selected on this unit.
1
When multicast station is received, the program
number is displayed, and <A> indicator lights UP.
FM 1- 2
2
Press FUNC./SETUP to display the Program Type
screen.
3
Turn the Double Action encoder (iDA-X200 only)
or Rotary encoder (iDA-X300 only) to select a
program, and press
The selected program is received.
FM 1- 3
Program Service example:
Multicast Radio Station Program No.
88.8
88.8
88.8
88.8
10
-EN
Program No.
8 8 . 8
ENTER.
/
Program No.
8 8 . 8
Program Service
1 MPS: Main Program Service
2 SPS: Sub-program Service
3 SPS: Sub-program Service
·
·
·
8 SPS: Sub-program Service
Changing the Display (HD Radio mode
only)
Press VIEW.
Every time VIEW is pressed changes the display.
Band No.
Station
Frequency
Station Call Letter*
Calendar
Song title
Clock
Album title
* You can set a long or short HD Radio station name. Refer to "HD
Radio Station Call Setting" (page 25).
Song title
Artist title
Band No.
Frequency