Publicité
● Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
2.6 Power tool use and care
● Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
● Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
● Disconnect the plug from the power source and/or the
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
● Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
● Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
● Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
● Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
2.7 Battery tool use and care
● Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
● Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
2.8 To minimized noise and vibration
exposure
● Plan the work so that exposure to heavy vibrations is
spread over a longer period.
● To reduce noise and vibrations when in use, limit the
time the tool is in use, and use low-power/vibration
mode and suitable safety equipment.
● Take the following precautions to minimise the risks of
exposure to vibrations and/or noise:
● Check that the tool is in good condition.
● Only use accessories that are in good condition, and
suitable for the job.
● Keep a firm grip on the handles/grips.
2.9 Nail gun safety warning
● Be careful when you move the product. Always think
that the product is loaded with fasteners. Incorrect
handling of the product can cause accidental firing
and injuries.
● Do not point the product at yourself, other persons, or
animals. Accidental firing of fasteners can cause
serious injury.
● Keep your fingers and body parts away from the outlet
port of the product.
● Safety the workpiece with fixturing device if necessary
to prevent injury.
● Do not operate the product unless it is tightly pushed
against the work piece. Incorrect operation of the
product can cause uncontrolled ejection of fasteners
and cause injuries.
● To prevent accidental operation and injuries, stop the
product and remove the battery before you load the
magazine with fasteners.
● Be careful when releasing blocked fasteners. The
magazine can be tensioned and the fastener can
suddenly fire out with force when you try to release it.
● Do not use the product to attach electric cables. Nail
guns are not applicable for electrical installation work
because they can damage the cable insulation and
cause electric shock or fire.
2.10 Additional safety instructions
● Loose workpieces must always be safetied.
● Always wait until the product has come to a complete
stop before you put it down. The product can get
caught and cause you to lose control.
2.11 Safety instructions for operation
● Read and obey the warning instructions before
operation.
EN
SV
NO
PL
DE
FI
FR
NL
9
Publicité
