Publicité
Table of contents
1 Introduction
1.1 The product .......................................................................7
1.2 Dedicated use ..................................................................7
1.3 Symbols ..............................................................................7
1.4 Product overview ...........................................................7
2 Safety
2.1 Safety definitions ...........................................................8
2.2 General power tool safety warnings ....................8
2.3 Work area safety .............................................................8
2.4 Electrical safety ...............................................................8
2.5 Personal safety ................................................................8
2.6 Power tool use and care .............................................9
2.7 Battery tool use and care ........................................9
2.8 To minimized noise and vibration exposure .....9
2.9 Nail gun safety warning ..............................................9
2.10
Additional safety instructions ..........................9
2.11 Safety instructions for operation ............................9
3 Operation
3.1 To do before operation ..............................................10
3.2 To attach and remove a battery ............................10
3.3 To adjust the belt clip .................................................10
3.4 To load fasteners ..........................................................10
3.5 To remove fasteners.....................................................11
3.6 To remove blocked fasteners ..................................11
3.7 To adjust the operation depth .................................11
3.8 To do a check of the safety tip ................................11
3.9 To adjust the firing mode ..........................................11
3.10
The status indicator .............................................11
3.11 To use the product at cold temperatures ..........11
4 Transport
5 Storage
6 Maintenance
6.1 To clean the product ...................................................12
7 Discard
8 Servicing
9 Technical data
1
Introduction
1.1
The product
7
The product is a battery powered nail gun with 2 different
firing modes. The product is a part of the Meec Tools
Multiseries 18 V. Staples, battery and battery charger are
not included.
1.2
Dedicated use
8
The product is used to attach different materials to
wooden surfaces and other applicable materials for
example paper, insulations, leather, or building plastic.
Only for domestic use.
1.3
Symbols
10
1.4 Product overview
Figure 1
1.
Depth adjuster
2.
LED work light
12
3.
Power trigger
4.
Handle
12
5.
Battery port
12
6.
Belt clip
7.
Magazine release button (on the other side)
8.
Mode selector switch
12
9.
Status indicator
12
10. Magazine
11.
Safety pad
12
12. Safety tip
Read the operating instructions carefully
and make sure that you understand the
instructions before you use the product.
Save the instructions for future reference.
Wear eye protection.
Wear ear protection.
This product complies with applicable EU
directives and regulations.
Recycle as electrical waste.
EN
SV
NO
PL
DE
FI
FR
NL
7
Publicité
