Publicité
then the blade attachment
The amount of wear and tear depends on the usage intensity, but in
general the components must be replaced after approximately one
year.
Switch the product off using the ON/OFF button
replacing the blade attachment
Hold the product tightly and turn the blade attachment
anticlockwise slightly to remove it from the product (see Fig. D).
Put a new blade attachment
wise slightly to attach it in place.
Cleaning and care
must be disconnected from the mains power supply before cleaning.
off before cleaning.
Note: Clean the product after each use.
The blade
1
water. Do not use any other liquids.
Do not use aggressive or abrasive cleaning agents.
Clean the blade
use (see Fig. E).
If the blade
e.g. after a wet shave, rinse them under running water (see Fig. E).
Clean the product (without the blade
if necessary.
Remove the comb attachment
ing hair with the cleaning brush
,
,
13
14
15
with the blade
2
DANGER OF ELECTRIC SHOCK! The product
DANGER OF INJURY! Always switch the product
and the blade attachment
with the included cleaning brush
1
and the blade attachment
1
with water if necessary (see Fig. E).
must be replaced.
1
.
2
on the product and turn it clock-
2
can be cleaned with
2
are particularly dirty,
2
) with a slightly damp cloth
1
,
,
and remove any remain-
13
14
15
. Wash the comb attachment
11
before
3
2
after every
11
GB/IE
47
Publicité
