Publicité
EN
further away from the surface or stop
working and allow it cool.
•
Clean the work area after finishing the
work, and recycle waste in accordance
with local regulations.
•
Always keep the cord at a safe distance
from the nozzle.
•
Switch off the product and pull out the
plug before leaving it unsupervised.
•
Allow the product to cool before putting it
away.
•
Never put the product on its side before it
has cooled. Place the product upright on
a solid, heat resistant surface.
•
Switch off the product, pull out the plug,
and wait until it has completely cooled
before putting it on a flammable surface.
•
Make sure that the air intake is not
blocked.
•
Keep the work area well ventilated to
prevent the accumulation of fumes.
•
Protect carpets and furniture etc. with a
suitable dust cover.
SYMBOLS
Read the instructions.
Safety class II.
Approved in accordance with
the relevant directives.
Recycle a discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
18
230 V ~ 50 Hz
Switch
Mode I
1350 W / 400°C / 300 l/min
Mode II
2000 W / 600°C / 500 l/min
Cord length
Weight
DESCRIPTION
1.
Hot air outlet*
2.
Guard
3.
Motor casing
4.
Fan/air intake
5.
Handle
6.
Power switch with 2 temperature modes
and off mode
FIG. 1
WARNING!
* Very hot when in use – risk of fire and/or
burn injury.
USE
IMPORTANT:
Read all the safety instructions before use.
NOZZLES
The product is supplied with four different
metal nozzles for diverse applications. Fit the
required nozzle over the air intake and press
firmly in place.
WARNING!
The nozzle gets very hot when in use – risk
of burn injuries. Allow the product to cool
before replacing a nozzle.
A. Used to direct the hot air at chosen area
without damaging the surrounding
material.
B. Used to heat small areas.
1.8 m
0.7 kg
Publicité
