Display Settings - Jvc Kd-R861Bt Manuel D'instructions

AUDIO SETTINGS
SPK/PRE OUT
Connection via lineout terminals (
Setting
FRONT
REAR/REAR Front speakers output
REAR/SUB.W Front speakers output
SUB.W/SUB.W Front speakers output
Connection via speaker leads (
Setting
L (left)
REAR/REAR Rear speakers output
REAR/SUB.W Rear speakers output
SUB.W/SUB.W Subwoofer output
If [SUB.W/SUB.W] is selected:
– [HIGH 120HZ] is selected in [SUB.W LPF] and [THROUGH] is not
available.
– [R01] is selected in [FADER] and selectable range is [R06] to [00]
16
)
23
Lineout terminal
REAR/SW
Rear speakers output
Subwoofer output
Subwoofer output
)
23
Rear speaker lead
R (right)
Rear speakers output
Rear speakers output
(Mute)

DISPLAY SETTINGS

1
Press and hold
2
Turn the volume knob to make a selection (see the following table), then
press the knob.
3 2
Repeat step until the desired item is selected/activated or follow the
instructions stated on the selected item.
4
Press to exit.
To return to the previous setting item, press
DISPLAY
DIMMER Selects the display and button illumination adjusted in the [BRIGHTNESS] setting.
OFF: Selects the day adjustments. ; ON: Selects the night adjustments. ; DIMMER
TIME: Adjusts the dimmer on and off time.
Turn the volume knob to adjust the [ON] time, then press the knob.
Turn the volume knob to adjust the [OFF] time, then press the knob.
(Default: [ON]: 18:00 or 6:00 PM
[OFF]: 6:00 or 6:00 AM)
AUTO: Changes between the day and night adjustments when you turn off or on the car
1
headlights. *
BRIGHTNESS Sets the button, display and USB input terminal brightness for day and night separately.
1 DAY / NIGHT: Select day or night.
2 Select a zone for setting. ( Illustration above)
3 Set the brightness level (00 to 31).
(Default: BUTTON ZONE: DAY: 25 ; NIGHT: 09
DISP ZONE:
SCROLL * 2
ONCE: Scrolls the display information once. ; AUTO: Repeats scrolling at 5-second
intervals. ; OFF: Cancels.
* 1
The illumination control wire connection is required. ( 23)
* 2
Some characters or symbols will not be shown correctly (or will be blanked).
.
.
DAY: 31 ; NIGHT: 12)
Default: XX